My Cart: 0 item(s)
![[SR] 2.0" Wheel Spacers PAIR Suzuki Yamaha ATV UTV 10x1.25 Studs 4/110 Flat Nuts](graphics/en-US/cssui/blank.gif "[SR] 2.0" Wheel Spacers PAIR Suzuki Yamaha ATV UTV 10x1.25 Studs 4/110 Flat Nuts")
StreetRays 2" Wheel Spacers PAIR Suzuki Yamaha ATV UTV 10x1.25 Studs 4/110 Flat Nut
StreetRays [Originals] parts are 100% machined right! here in Central Texas.
Matched with the best hardware which is also sourced here in USA. Quality
material as well as precision machining is the #1 ingredients of all our parts.
Part # SR-ATVFLAT-WHEELSPC2 x 2
StreetRays [Originals] parts are 100% machined right! here in Central Texas.
Matched with the best hardware which is also sourced here in USA. Quality
material as well as precision machining is the #1 ingredients of all our parts.
Part # SR-ATVFLAT-WHEELSPC2 x 2
This sale is only for 2 wheel spacers, enough to widen the front wheels or the rear wheels. If you
want to widen all 4 wheels, you will need 2 pairs.
NOTE: Only fits UTV / ATV with 4x110mm Bolt Pattern. Please do verify that your wheels have the
want to widen all 4 wheels, you will need 2 pairs.
NOTE: Only fits UTV / ATV with 4x110mm Bolt Pattern. Please do verify that your wheels have the
correct bolt pattern.
Specifications:
Quantity: 2 x Billet Spacers
Individual Thickness: 2"
Center Bore: 74.1mm OEM Spec
Bolt Pattern: 4x110mm
Stud/Nut Thread: M10X1.25 OEM Spec
Stud Grade: Grade 12.9 (Exceed OE Spec)
Lug Nuts Included: 8 Per Pair (Flat Seat Nuts)
StreetRays Wheel Spacers Pair will widen your UTV or ATV track by a total of 4" (2.0" for each side).
If you plan to lift your ATV, then this kit is highly recommended to restore balance and stability of the
overall ATV. These wheel spacers can easily be installed within just minutes, all it takes is for you to
remove the wheels / tire and put this spacer in between, and torque the spacers and wheels back on.
StreetRays wheel spacers are machined right here in Austin, TX. From a solid heat treated 6061 T6
billet aluminum (USA material). Our design and our quality if bullet proof. It will out last even the cart
itself. All hardware is included in the kit (as shown in pictures).
Specifications:
Quantity: 2 x Billet Spacers
Individual Thickness: 2"
Center Bore: 74.1mm OEM Spec
Bolt Pattern: 4x110mm
Stud/Nut Thread: M10X1.25 OEM Spec
Stud Grade: Grade 12.9 (Exceed OE Spec)
Lug Nuts Included: 8 Per Pair (Flat Seat Nuts)
StreetRays Wheel Spacers Pair will widen your UTV or ATV track by a total of 4" (2.0" for each side).
If you plan to lift your ATV, then this kit is highly recommended to restore balance and stability of the
overall ATV. These wheel spacers can easily be installed within just minutes, all it takes is for you to
remove the wheels / tire and put this spacer in between, and torque the spacers and wheels back on.
StreetRays wheel spacers are machined right here in Austin, TX. From a solid heat treated 6061 T6
billet aluminum (USA material). Our design and our quality if bullet proof. It will out last even the cart
itself. All hardware is included in the kit (as shown in pictures).