My Cart: 0 item(s)
Energy Suspension 9.13101G Tie Rod Dust Boots - Round
At last it is now possible to replace a dust boot without having to buy a new tie rod!!! These HYPER-FLEX TM polyurethane dust boots resist damage from rocks road salt sand water and are impervious to undercar fluids.
Each has a unique 5-point sealing action design that prevents loss of lubricants and contamination— the major cause of rod wear.
Please check for applications for your make/model/year before choosing these boots.
1) The rod end must measure at least the minimum dimensions shown below or larger. Approximates will do because of the elasticity of the product. The boot will seal better when it stretches over a larger dimension tie rod.
2) In some cases you need to insert a thin not sharp object under the lip of the boot to pull over area “B” of the tie rod end.
3) Remember choose the part number (Part#) that has the dimensions closest to the vehicle’s yet it must measure larger than the minimums in the diagram below.
MINIMUM O.D. DIMENSION:
Largest Diameter Taper = 0.590" / 15mm
Top of Socket Diameter = 1.375" / 35mm
At last it is now possible to replace a dust boot without having to buy a new tie rod!!! These HYPER-FLEX TM polyurethane dust boots resist damage from rocks road salt sand water and are impervious to undercar fluids.
Each has a unique 5-point sealing action design that prevents loss of lubricants and contamination— the major cause of rod wear.
Please check for applications for your make/model/year before choosing these boots.
1) The rod end must measure at least the minimum dimensions shown below or larger. Approximates will do because of the elasticity of the product. The boot will seal better when it stretches over a larger dimension tie rod.
2) In some cases you need to insert a thin not sharp object under the lip of the boot to pull over area “B” of the tie rod end.
3) Remember choose the part number (Part#) that has the dimensions closest to the vehicle’s yet it must measure larger than the minimums in the diagram below.
MINIMUM O.D. DIMENSION:
Largest Diameter Taper = 0.590" / 15mm
Top of Socket Diameter = 1.375" / 35mm