My Cart: 0 item(s)
Many Toyota trucks
and SUVs run out of factory adjustment when you install lift kits.
With our patented design this upper control arm provides an additional
+/- 2 degrees of camber and 0 degree to +4 degree of caster change.
Built with an OE style ball joint and new SpecRide(tm) bushings, this
arm is designed to correct alignment angles while maintaining factory
ride quality. The hybrid tubular and forged steel design is tough
enough to race - on or off-road. These remove and replace arms are
available in pairs for lifted and off-road applications.
These arms feature our NEW SpecRide(tm) Bushings
SpecRide(tm) Proprietary Bushings Feature:
* Free moving pivot sleeve which eliminates failures caused by high travel suspensions
* Noise and vibration control
* Ozone, oil and alkaline resistant material
Adjustment range: Camber +/- 2.00 degree
Caster 0.0 degree to +4.00 degree
Installation time: .8 hr/side
These arms feature our NEW SpecRide(tm) Bushings
SpecRide(tm) Proprietary Bushings Feature:
* Free moving pivot sleeve which eliminates failures caused by high travel suspensions
* Noise and vibration control
* Ozone, oil and alkaline resistant material
Adjustment range: Camber +/- 2.00 degree
Caster 0.0 degree to +4.00 degree
Installation time: .8 hr/side
- Part #: 25470
- Camber Adjustment: Camber +/- 2.0
- Caster Adjustment: Caster 0.0 to +4.00
- What's Included: Two Arms with Ball Joints
Important Shipping NOTICE: Posted shipping cost ONLY applies for lower 48 states. Shipping to HI/PR/AK/VI/GU may cost more. Please contact us before you place any order. Thank you.