My Cart: 0 item(s)

Skyjacker Set of 4 Front & Rear Hydro Shocks Silverado /Sierra /Suburban /RAM
Part # H7017 x2 & H7019 x2
Complete set of 4 shocks included
Placement on Vehicle Front & Rear
TYPE Hydraulic
SERIES Softride Hydro H7000
Hydro 7000 Shock Features:
Hydraulic Action
Orifice Disk
Velocity Sensitive Valving
Leak Proof Seal
Bonded Iron Piston
Chromed Piston Rod
Red Boot Included
Red Polyurethane Bushings
Limited Lifetime Warranty
H7019 Specs:
Extended Length: 15.3"
Compressed Length: 10.02"
Travel Length: 5.28"
Upper Mounting Code: S1
Lower Mounting Code: ES34,
H7017 Specs:
Extended Length: 27.19"
Compressed Length: 16.16"
Travel Length: 11.03"
Upper Mounting Code: ES34
Lower Mounting Code: ES34
Hydraulic damping and velocity-sensitive valving generate a damping force proportional to the velocity of compression or extension of the shock. Slow compression provides low resistance fast compression provides greater resistance.
All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation.
SkyJacker's limited lifetime warranty protects against defects and premature failure.
Skyjacker Hydro Shocks offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shocks real job is controlling the energy stored in the springs.