BB Chevy Hole-shot Manifold (Satin)
This manifold will not fit under the hood of Corvettes without hood modifications. Will not fit "tall block" V8s. May be used with OEM or aftermarket carburetors.
For street applications use the stock Quadrajet carburetor. For Street Performance use a 650-750 CFM performance or double pumper carb and for Competition use a 700-850 CFM double pumper. Note that the Power+Plus Manifold kit includes a carb adapter plate and gasket to allow the use of square bore carburetors. Square bore carbs on this manifold are not legal for use on any emission controlled vehicle.
Note: This is a stock replacement/street legal part for 396, 402, 427, and 454 V8s with OEM 4-bbl carb; 1965-1972 (1973 non-CA) passenger cars and 1966-1983 trucks, Suburbans, and heavy vehicles; except stock equipped EGR.
180° dual plane design for power from idle to 6000 RPM
Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous injectors
Dual carb bolt pattern for the spreadbore Quadrajet or squarebore Holley 4150/4160 style
Ideal port position - steel mold cast to reduce core shift
Dual distributor hold-down provisions for extra protection against distributor rotation
Four corner water outlets
This manifold is a stock replacement part for 396 402 427 454 V8 engines. With OEM 4-bbl carb. 65-72 passenger cars, 66-83 trucks, suburbans, and heavy cars. Does not support stock EGR.
This manifold comes with NOS bosses, dual distributor hold-downs, and four corner water ports. It also comes with a special carb adaptor to allow use of aftermarket square bore carb.
Important Shipping NOTICE: Posted shipping cost ONLY applies for lower 48 states. Shipping to HI/PR/AK/VI/GU may cost more. Please contact us before you place any order. Thank you.